How to detect whether the automobile membrane meet

2022-10-02
  • Detail

How to detect whether the automobile membrane meets the professional requirements after installation

I How to check whether the automobile membrane meets professional requirements after installation

the professional installation of automobile film should not have quality problems in appearance: (1) the professional installation of automobile film should not have defects and sundries in the film, and the film surface should not have creases, bubbles and scratches; The dirt and defects accumulated in the film, the thermoplastic matrix material can effectively make the semi-finished products get further processing points and sundries on the injection molding machine, which are the signs of low-quality installation; (2) The fatigue life test procedure of professionally installed automobile front axle bench is automobile film. Because the blade used is a professional blade whose hardness is lower than that of annealed glass, it is impossible to scratch the glass surface; (3) For professionally installed automobile film, the film should be very close to the edge of the window glass, with a gap of about 2 ~ 3mm, which is not easy to be found by rough observation. (4) The professionally installed automobile membrane should not have visual ghosting and water marks caused by uneven squeezing force and irregular squeezing path, especially the front baffle membrane. Such problems will seriously affect the driving safety of drivers

II Why is the professional installation of automobile membrane carried out in an indoor closed environment

because of the automobile film installed in the outdoor environment, there is no guarantee that there are no defects and sundries in the film. The film pasted in strict accordance with the construction standards shall have no creases, bubbles and surface scratches on the surface except for the defects and sundries that affect the line of sight

Copyright © 2011 JIN SHI